iristech-header-sensors

IR/UV/IR3 detectors

FLAME DETECTION

Advantages of optical flame detection:

  • Rapid detection capability - milliseconds,
  • Remote detection - can go up to 300 ft (90 m),
  • Detection inside and outside,
  • Can be interfaced with a Signifire server for smoke detection, flame reflection and intrusion detection,
  • Classified zones (ATEX) and wide temperature range,
  • Very resistant to environmental conditions (wind, cold, rain),
  • Capacity for self-control.

Application areas:

  • Oil and gas installations,
  • Offshore / onshore,
  • Petrochemicals / Chemistry,
  • Electricity production facilities,
  • Pharmaceutical industry,
  • Storage of hazardous materials,
  • Waste treatment,
  • Warehouses,
  • Aircraft hangars,
  • Automobile / airless paint,
  • Explosives / ammunition,
  • Printing industry,
  • Hydrogen fuel cell industry.
iristech-flame-detector-sensors
 

Principles of flame detection:

sensors-principles-iristech

Certifications:

sensors-certified-by-iristech
 

PROTESTS

> Flame detection

> Smoke detection

> Intrusion detection

> Detection of reverberation

> Detection of oil mist

Downloads

> Commercial plaque Signifire

> Technical sheet NVR

> Technical sheet NVR lite

> Industrial installations

> Historical monuments

> Aeronautics

> Field of energy

> Warehouses

 
 
 

PROTESTS

 

Real tests of our triple infrared (IR3) flame detectors: the flame is detected in a few seconds, including a hydrogen flame that is almost invisible to the naked eye.

Hydrogen flame – IR3-H2-HD detector (large: image of the detector; in a medallion: a conventional camera)

ADD THE FUMUS DETECTION: IR3 + SERVEUR SIGNIFICATE

 

The IR3-HD detector incorporates a video output. Connected to a SigniFire server, Its flow is continuously analyzed to detect also smoldering, the Flame reverberation (masked fire) and the Intrusions. One single device thus ensures flame detection by triple infrared and video analysis of the smoke. The alarm is sent to the fire control center (dry contacts or Modbus TCP/IP) with the video recording of the event for further investigation.

Where to use it: Video analysis of the smoke is reliable in indoor and in covered areas (warehouses, halls, machine rooms). In outdoor, Where wind and light disturb the image, triple IR flame detection ensures protection.

Learn more about the SigniFire video analytics →  ·  Request a free study →

PROTESTS

 

Real tests of our triple infrared (IR3) flame detectors: the flame is detected in a few seconds, including a hydrogen flame that is almost invisible to the naked eye.

Hydrogen flame – IR3-H2-HD detector (large: image of the detector; in a medallion: a conventional camera)

ADD THE FUMUS DETECTION: IR3 + SERVEUR SIGNIFICATE

 

The IR3-HD detector incorporates a video output. Connected to a SigniFire server, Its flow is continuously analyzed to detect also smoldering, the Flame reverberation (masked fire) and the Intrusions. One single device thus ensures flame detection by triple infrared and video analysis of the smoke. The alarm is sent to the fire control center (dry contacts or Modbus TCP/IP) with the video recording of the event for further investigation.

Where to use it: Video analysis of the smoke is reliable in indoor and in covered areas (warehouses, halls, machine rooms). In outdoor, Where wind and light disturb the image, triple IR flame detection ensures protection.

Learn more about the SigniFire video analytics →  ·  Request a free study →

 
 
irisfire-bg-2-iristech